HVAC (AIR CONDITIONING)

HVAC (AIR CONDITIONING)

HVAC DESIGNING & DRAFTING

1.Introduction & Fundamentals of HVAC.
2.Definitions as per ASHRAE.
3.Terminology used in HVAC.
4.Modes of Heat Transfer.
5.Study of Psychometric chart (6 axis diagram).
6.Refrigeration Components. (Compressor, Condenser, Expansion valve, Evaporator).
7.Basic Refrigeration Cycle.
8.Line Diagrams and cycle of (Window A/c, Split A/c, Package, Central A/c).
9.Types of Air-conditioning Systems. (All Air system, All water system, Air water system, Direct Refrigeration system).
10.Building Survey.
11.Orientation of Buildings.
12.To read Latitude of location of building.
13.Calculation of U-factor for walls, Glass, Roof, Partitions.
14.Calculation of Temperature Difference of walls, Glass, Roof, Partitions.
15.Cooling & Heat load calculation using ASHRAE standards.
16.Filling of E-20 forms.
17.Calculation of Sensible heat factor, ADP and Dehumidification.
18.Duct Designing.
19.Layouts of Single line diagram.
20.Conversion of Single to Double line.
21.Static pressure calculation.
22.Air distribution system.
23.Designing of chilled water piping.
24.Equipment selection.
25.HVAC system maintenance introduction.
26.Introduction to Plate Exchangers.
27.Basic function of PHE.
28.Types of PHE & its use.
29.PHE ARI 400 standards.
30.Maintenance of PHE.
31.Operation of PHE.
32.Introduction to Cooling Towers.
33.Maintenance of Cooling Towers.
34.Project work.
35.Group Discussion.
36.Interview preparation.

Course Type: Certificate course.

Duration: 2 months


PROJECT PLANNING & EXECUTION

1.Introduction & Fundamentals of HVAC.
2.Definitions as per ASHRAE.
3.Terminology used in HVAC.
4.Modes of Heat Transfer.
5.Types of Air-conditioning Systems. (All Air system, All water system, Air water system, Direct Refrigeration system).
6.Layouts of Single line diagram.
7.Conversion of Single to Double line.
8.Equipment selection.
9.Introduction to Plate Exchangers.
10.Basic function of PHE.
11.Types of PHE & its use.
12.PHE ARI 400 standards.
13.Introduction to Cooling Towers.
14.Drawing studying.
15.Material Planning.
16.Making Activity Schedule.
17.Resource Planning.
18.Project Planning.
19.Project Planning Software.
20.Project Executing.
21.Project Monitoring.
22.Types of Sheets (Gauges, G90 Z-27 coating).
23.Types of Dampers.
24.Types of Air Distribution systems.
25.Installation Procedures.
26.Brazing Procedures.
27.Making Request for Inspection (RFI).
28.Installation Quality Inspection.
29.Safety Requirements.
30.Documentations.
31.Project Work.
32.Group Discussions.

Course Type: Certificate course.
Duration: 2 months.


PROJECT ESTIMATION & SALES

1.Introduction & Fundamentals of HVAC.
2.Definitions as per ASHRAE.
3.Terminology used in HVAC.
4.Modes of Heat Transfer.
5.Types of Air-conditioning Systems. (All Air system, All water system, Air water system, Direct Refrigeration system).
6.Layouts of Single line diagram.
7.Conversion of Single to Double line.
8.Equipment selection.
9.Introduction to Plate Exchangers.
10.Basic function of PHE.
11.Types of PHE & its use.
12.PHE ARI 400 standards.
13.Introduction to Cooling Towers.
14.Drawing studying.
15.Site Survey.
16.Making Bill of Materials.
17.Making Bill of Quantities.
18.Making RFQ’s to Vendors.
19.Price comparison.
20.Estimation.
21.Quotation making & Tendering.
22.Making Submittals.
23.Introduction to Commercial Terms.
24. Making Sales Presentations (Annually).
25. Documentations.
26. Making Sales report.
27. Weekly Sales Planning.
28. Vendor Development.
29. Project work.
30. Individual Presentation.
31. Group discussion.
32. Interview Preparation.

Course Type: Certificate course.
Duration: 2 months.

Pages:- 1
[ Online / Live ] [ Corporate Training ] [ Locations ] [ Schools ] [ Job Seekers ]

Dear Visitor: You are strongly recommended to bookmark this page and come back later, since new course may be available anytime. Click to Proceed>>