Building Scalable Cisco Internetworks 2.1 (BSCI)

GBdirect Ltd
Leeds, West Yorkshire, United Kingdom

Course Format: Classroom | E-learning | Virtual Class | Online | On-site | Blended | Self-paced

Course Description:

'' The BSCI 2.1 course is recommended training for individuals seeking certification as a Cisco Certified Network Professional (CCNP). This five-day instructor-led course instructs delegates of medium to large network sites on the use of advanced IP addressing and routing in implementing scalability for Cisco routers connected to LANs and WANs. The goal to train network administrators to grow a dramatically increased number of routers/sites using these techniques instead of redesigning the network when additional sites or wiring configurations are added.

Course Objectives
After completing this course, students will be able to:

Describe advanced IP addressing to include variable-length subnet mask, route summarization, classless interdomain routing (CIDR), basic IP version 6, and using Network Address Translation (NAT) with route maps
Identify advanced IP routing principles, including static and dynamic routing characteristics and the concepts of classless routing and network boundary summarization
Configure Enhanced Interior Gateway Routing Protocol (EIGRP) for a scalable network
Configure Open Shortest Path First (OSPF) for a scalable multiarea network
Configure Intermediate System-to-Intermediate System (IS-IS) for a scalable multiarea network
Manipulate routing updates and packet flow using redistribution, distribution lists, administrative distance, route maps, and policy-based routing
Configure basic Border Gateway Protocol (BGP) for internal and external Border Gateway Protocol connections
Intended Audience
This course is intended for:

Network administrators and technicians
Customers or channel resellers
Network support staff
Candidates for CCNP, CCDP, CCIP and CCIE certifications.
Prerequisites
To fully benefit from this course, the BSCI v2.1 student typically will have attended the Cisco CCNA curriculum and passed the CCNA certification test. Successful students must have the following prerequisite skills and knowledge to be at a level appropriate for entering BSCI v2.1:

Networking terms, numbering schemes, and topologies
Open System Interconnection (OSI) reference model
Operating and configuring a Cisco router
TCP/IP stack and configuring IP addresses
IP subnetting to include complex subnetting and variable-length subnet masking (VLSM)
Routing protocol operation and configuration for Routing Information Protocol (RIP), Interior Gateway Routing Protocol (IGRP), Enhanced IGRP (EIGRP), and Open Shortest Path First (OSPF) single-area networks
Using, implementing, and configuring static and default routes
Interpreting the contents, entries, and indicators from a Cisco routing table
Filtering traffic with standard and extended access lists
Verifying basic router configurations using show and debug command output
Verifying basic switch configurations using show command output
Configuring a WAN serial interface using High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP)
Configuring a WAN serial interface using Frame Relay permanent virtual circuits (PVCs) and subinterfaces
Certification
This course is recommended as preparation for exam(s):

642-801
642-891 - Composite Exam incorporating both BSCI and BCMSN
BSCI is part of the CCDP/ CCIP and CCNP Certification Path

...''

Phone:0800 651 0338, +44 (0)870 200 7273

School Address:

GBdirect Ltd
Training Division
Leeds Innovation Centre
103 Clarendon Road
LEEDS
LS2 9DF
West Yorkshire
United Kingdom

Jobs & Resumes: Leeds
Houses & Roommates: Leeds

Embedded C Programming with PIC 16F877
Introduction to C++ Programming
C++ Programming for C Programmers
Advanced C++ Programming
CVS
Subversion
Designing Cisco Network Service Architecture (ARCH)
Aironet Wireless LAN Fundamentals & Cisco Aironet Wireless Site Survey (AWFSS)
Building Cisco Multilayer Switched Networks 2.1 (BCMSN)
Building Cisco Remote Access Networks 2.2 (BCRAN)
CCIE Routing and Switching Bootcamp
Cisco IP Telephony Parts 1&2 Bootcamp
Cisco Internetwork Troubleshooting 5.1 (CIT)
Cisco SAFE Implementation v2.0 (CSI)
Content Services Switch Operation and Configuration v7.0 (CSSOC)
Cisco Secure Virtual Private Networks v4.0 (CSVPN)
Cisco Voice over IP 4.2 (CVOICE)
Implementing CiscoWorks LMS v2.5 (CWENT)
Designing for Cisco Internetwork Solutions v1.2 (DESGN)

Notice: The course description on this page was captured from the Internet as historical reference or submitted by visitors. It was archived statically and not updated from day to day.
 

Tips: Try the search form on top of each page to find the latest course information, using course topic and location as keywords. Keep the course topic keyword short to get more results.