CCNA Fast Track Programme

Global Knowledge (UK) Inc.
Dublin,Maidenhead, United Kingdom

Course Format: Classroom | E-learning | Virtual Class | Online | On-site | Blended | Self-paced

Course Description:

'' The data networking market only continues to grow. As more and more people become dependent upon data infrastructures, the requirements to build, configure, maintain and upgrade data and converging voice networks simply increases. The need for highly-trained network professionals will always be a requirement as companies expand their operations. The CCNA Fast Track Programme not only prepares new network administrators for the tasks they will face in the real world, it also gets them their CCNA certification.

The CCNA Fast Track Programme is a five-day course based on the Cisco’s INTRO and ICND course but focussing solely on the content areas that will examined in the CCNA exam

Included are the following in this programme:

Prior to course commencement

Self-paced eLearning material for Cisco INTRO Course (40-47 hrs of training content)
4 Cisco eLabs (4 hrs of training content)

On course commencement:

5 day instructor led course
CCNA Exam Voucher (only for UK scheduled sessions)

The days will run much longer than a typical ICND course due to the amount of additional exam preparation work that is covered.

Learn How To

Install and Configure Cisco Routers and Switches in Multiprotocol Networks
Identify Components and Functions of the OSI Model
Configure Basic Operation of Cisco IOS Software
Configure a Router and Switch from Command Line Interface
Use System Files to Learn About Neighboring Devices
Configure the Catalyst 1900 Switch
Extend Switched Networks with Virtual LANs (VLANs)
Interconnect Networks Using TCP/IP
Determine IP Routes with RIP and IGRP
Configure IP Access Lists
Complete an ISDN BRI Call Connect to Frame Relay Services
Configure Serial Connections to WAN Service Providers

Course Outline
1. Operating and Configuring Cisco IOS Devices
2. Managing Your Network Environment
3. Configuring Catalyst Switch Operations
4. Extending Switched Networks with VLANs
5. Determining IP Routes
6. Managing IP Traffic with Access Lists
7. Establishing Serial Point-to-Point Connections
8. Establishing Frame Relay Connections
9. Completing ISDN Calls

Hands-On Labs

Lab 1: Initial Switch Setup
Configure the classroom PCs and switches with a basic IP configuration via the switch menu systems and HTTP interface.

Lab 2: Initial Router Configuration Using Setup
Complete the classroom network by configuring the classroom routers with a basic IP and RIP configuration via the router utility, Setup.

Lab 3: Manual Configuration of the Router
Perform additional configurations to the router that are not available through the Setup utility.

Lab 4: Router Examination
Verify the various configurations that have been applied thus far.

Lab 5: Network Discovery with CDP
Discover information about directly connected Cisco neighbor devices.

Lab 6: Remote Access via Telnet
Access other Cisco devices and learn how to remotely manage them.

Lab 7: Using a TFTP Server
Copy configuration files into and out of the router using TFTP.

Lab 8: Switch Examination
Examine various aspects of the Catalyst switches used in the classroom.

Lab 9: Configure VLANs
Configure and test various VLANS in a controlled environment.

Lab 10: Configure Trunks, VTP and STP
Configure switch interfaces to carry multiple VLANs. Examine how VTP propagates VLAN information and how STP breaks switching loops.

Lab 11: Network Verification
Examine how the routers interact with each other across the classroom network.

Lab 12: IGRP
Change the classroom network from the RIP routing protocol to IGRP.

Lab 13: EIGRP
Change the classroom network from the IGRP routing protocol to EIGRP.

Lab 14: OSPF
Change the classroom network from the EIGRP routing protocol to OSPF.

Lab 15: Standard IP Access Lists
Configure standard IP access lists to block network traffic and control telnet into the routers.

Lab 16: PPP and CHAP
Change the router serial ports from HDLC to PPP using the CHAP authentication protocol.

Lab 17: Frame Relay
Change the router serial ports from PPP to Frame Relay, and configure two virtual circuits across the classroom network.

Lab 18: ISDN and CHAP
Place ISDN calls from the classroom routers to send data.






Who Needs to Attend
The CCNA Fast Track Programme is for those who have a background in data networking and are looking to achieve the first level of Cisco certification, the CCNA.

For those who have not passed the INTRO exam (640-821) but wish to achieve CCNA Certification quickly.






Suggested Prerequisites

The participant should have good networking experience and a familiarity with commonly used networking terms and topologies, but do not require any cisco technology experience.

It is critical that all delegates have studied the Cisco Self-paced elearning content that is made available prior to course commencement.

In particular they must understand the Open System Interconnect (OSI) reference model, Binary and hexadecimal numbering IP addressing and subnetting.

...''

Phone:+00 353 (0) 1 613 0340 /+44 (0) 1628 594 700

School Address:

Global Knowledge Training Centre Dublin
27 Lower Mount Street
Dublin 2
Phone: +00 353 (0) 1 613 0340
Fax: +00 353 (0) 1 613 0341
Email: salesdesk.ie@globalknowledge.ie

Global Knowledge Training Centre Maidenhead
Cincom House
1 Grenfell Road
Maidenhead
SL6 1HN Berkshire
Phone: 0845 304 0044
Phone: +44 (0) 1628 594 700
Fax: +44 (0)1628 776 600
Email: salesdesk.uk@globalknowledge.co.uk


Jobs & Resumes: Dublin, Maidenhead
Houses & Roommates: Dublin, Maidenhead

Citrix MetaFrame XP Enterprise Administration
Cisco Sales Essentials (CSE)
NetGun 27 Programme (CI-CCIE)
CCIE Routing & Switching Preparation Labs (CI-CCIEPL)
CCIE Routing & Switching Preparation Lab (Germany) (CI-CCIERS)
CCIE Security Preparation labs (CI-CCIESL)
Cisco CCIE Security Written Exam Preparation (CI-CCIESW)
CCNA (Cisco Certified Network Associate) Part-Time Evening Boot Camp (CI-CCNAPT)
CCNP Fast Track Programme (CI-CCNPFT)
CCNP & CCDP Recertification Programme (CI-CCNPR)
BPX Switch and Service Configuration (CI-BSSC)
Cisco WAN Manager Installation & Operation (CI-CWMIO)
Installation of Cisco WAN Switches (CI-ICWS)
Cisco MPLS in BPX and MGX Networks (CI-IMPLS)
MGX ATM Concentrator Configuration
MGX ATM Edge Switch Configuration (CI-MAESC)
MGX PNNI Switch Services Configuration (CI-MPSSC)
Multiband Switch and Service Configuration (CI-MSSC)
Cisco Cable Network Register (CI-CNR)

Notice: The course description on this page was captured from the Internet as historical reference or submitted by visitors. It was archived statically and not updated from day to day.
 

Tips: If you want to post any message on this website, please do not include your real name, phone number, email address in the message body area. You should enter them in line text boxs respectively, if needed.