Training Course:CompTIA Server+ 2005School/Trainer:ENO.com
Stafford, Virginia, United States
Course Format: Classroom | E-learning | Virtual Class | Online | On-site | Blended | Self-paced
Course Description:
'' Schedule our instructor led classroom trainings at your convenience and never miss another lecture or fall behind. You are in complete control. We invited the Best ComTIA Server+ Trainers in the industry to help us develop the ultimate training & certification program which includes everything you will need to fully prepare for and pass your certification exams.
The skills and knowledge measured by the Server+ 2005 exam are derived from an industry-wide and worldwide job task analysis and a survey to validate the job task analysis. The survey results were used to weight the test domains and ensure that the weightings are representative of the job requirements. This exam blueprint includes the test objectives and the relative weightings. The table below lists the domains measured by this examination and the extent to which they are represented in the examination. Example topics and concepts are included to clarify the test objectives and should not be construed as a comprehensive list of all the content of this exam.
Included with this Program:
8 CDs featuring live instructor-led classroom sessions with full audio, video and demonstration components
1 MeasureUp Exam Simulator
Printable Courseware
Live Education Support from Certified Trainers
Exclusive Exam Pass Guarantee
Certification of Completion
Course Outline:
ComTIA Server+ Course Objectives:
Domain or Chapter % of Examination
1.0 General Server Hardware Knowledge - 30%
2.0 Installation -10%
3.0 Configuration -15%
4.0 Upgrading -15%
5.0 Proactive Maintenance - 5%
6.0 Environment - 5%
7.0 Troubleshooting and Problem Determination -15%
8.0 Disaster Recovery - 5%
Total - 100%
Chapter 1.0 - General Server Hardware Knowledge
-1.01 System Bus Architectures
-1.02 Adapter Fault Tolerance
-1.03 Types of Servers
-1.04 Application Server Models
-1.05 Memory Types and Server Memory Requirements
-1.06 SCSI Storage Solutions
-1.07 SATA (Serial ATA) Storage Solutions
-1.08 Fibre Channel Hardware
-1.09 iSCSI and FCIP Technologies
-1.10 RAID Technologies
-1.11 Know the characteristics of hot swap drives and hot plug boards.
-1.12 Know the features, advantages, and disadvantages of multiprocessing.
-1.13 Know the attributes, purpose, function, and advantages of clustering.
-1.14 Server Processor Subsystems
-1.15 Know Network Storage Systems
Chapter 2.0 - Installation
-2.01 Conduct pre-installation planning activities
-2.02 Install hardware using best practices
-2.03 Develop the server management plan (in-band and out-of-band
management)
Chapter 3.0 - Configuration
-3.01 Check/upgrade BIOS/firmware levels (system board, RAID controller, hard drive, ect.)
-3.02 Configure RAID
-3.03 Install NOS
-3.04 Configure External Peripherals
-3.05 Install NOS and driver updates to design specifications
-3.06 Install service tools (SNMP, backup software, system monitoring agents, event logs, etc.)
-3.07 Perform Server Baseline
-3.08 Document the configuration
-3.09 Implement the server management plan (OS-dependent and OS-independent components).
Chapter 4.0 - Upgrading
-4.01 Perform Backup
-4.02 Add Processors
-4.03 Add Hard Drives
-4.04 Increase Memory
-4.05 Upgrade BIOS/firmware
-4.06 Upgrade adapters (e.g., NICs, SCSI cards, RAID, etc.)
-4.07 Upgrade peripheral devices, internal and external & verify appropriate system resources
-4.08 Upgrade system monitoring agents
-4.09 Upgrade service tools (e.g., diagnostic tools, EISA configuration, diagnostic partition, SSU)
-4.10 Upgrade UPS
Chapter 5.0 - Proactive Maintenance
-5.01 Perform regular backup
-5.02 Create baseline and compare performance
-5.03 Adjust SNMP thresholds
-5.04 Perform physical housekeeping
-5.05 Monitor, maintain, and follow the server management and service plan.
Chapter 6.0 - Environment
-6.01 Recognize and report on physical security issues
-6.02 Recognize and report on server room environmental issues
Chapter 7.0 - Troubleshooting and Problem Determination
-7.01 Perform problem determination
-7.02 Use diagnostic hardware and software tools and utilities.
-7.03 Identify bottlenecks
Chapter 8.0 - Disaster Recovery
-8.01 Read and follow the disaster recovery plan.
...''
Please go to the school's official website for training price and schedule:
http://www.eno.com/
Phone:(888) 742-3214 or 540-720-9660
School Address:
E&A Information Services Inc. (DBA: Eno.com)
6 St. Charles Ct
Stafford, VA 22556. USA
Jobs & Resumes: Stafford
Houses & Roommates: Stafford
Other training courses offered by ENO.com:
Managing and Maintaining Windows Server 2003
Implementing and Maintaining Windows 2003 Infrastructure
Planning and Maintaining Windows 2003 Infrastructure
Planning and Implementing Windows 2003 Active Directory
SQL Server 2005 Databases and Servers
Small Business Server (SBS)
Microsoft.NET Solution Architectures MCSD.NET
A+ Certification and Network+ Dual Certification
ComTIA Network+
CompTIA Linux+ 2005
CCNA
Cisco Wireless LAN Support Specialist
CWNA (Certified Wireless Network Administrator)
CCNP
Office 2003 MOUS
CEH: Certified Ethical Hacker
Computer Forensics - Digital Forensics and Electronic Discovery
Computer Forensics - Advanced Digital Forensic Techniques
Hacking, Penetration Testing and Countermeasures
Notice: The course description on this page was captured from the Internet as historical reference or submitted by visitors. It was archived statically and not updated from day to day.
Facts:
We provide free training course catalog service since 2003, in English and Chinese. Tens of thousands of visitors search our database from our portal and partners' websites each day. |
|
|
