Training Course
Locations | Schools | Online Courses | MBA | Submit Course | Post Request | Students | Jobs | House Rental


Jobs & Resumes

House Rental

Back | Home

Training Course:

MGX ATM Edge Switch Configuration v4.0

School/Trainer:

Network Training Solutions
Marlow, United Kingdom

Course Format: Classroom | E-learning | Virtual Class | Online | On-site | Blended | Self-paced

Course Description:

'' The MGX ATM Edge Switch Configuration (MAESC) course teaches learners how to set up a Private Network-Network Interface (PNNI) network that supports ATM and Layer-3 services on MGX 8830, 8850-PXM1E, 8850-PXM45, and 8950 switches. The course starts with an explanation of setup procedures for the MGX switch family. The course focuses on the ATM physical interface configuration as well as on creation of virtual circuits on various cards. In addition, the Internet Protocol (IP) configuration steps on connection routers and Route Processor Module (RPM) are covered as well.


Objectives
After finishing this module, the student will be able to:
Configure MGX 8830, 8850-PXM1E, 8850-PXM45, and 8950 ATM PNNI switches from isolation into a network that supports ATM and Layer 3 (IP) services.
Operate and monitor the MGX network once traffic is established


Importance
The MAESC course is highly recommended to students setting-up the PNNI network supporting the ATM and Layer 3 services.

Target Audience
System Engineers, Channel Partners/Resellers and Customers involved in MGX ATM edge switch setup, configuration and operation.


Prerequisite Knowledge
WAN Quick Start (WQS) guide, basic networking concepts, PNNI concepts (recommended).

Course Outline
Course Introduction
Determining the Required Features and Hardware for you MGX 8800-Series Switch
Setting Up the MGX Switch
Setting Up PNNI on MGX Switches
Setting Up Interfaces on AXSM and PXM1E
Setting Up Network Synchronization
Using the Service Class Template
Creating ATM Virtual Circuits on AXSM and PXM1E Cards
Controlling Network Access and Connectivity
Managing Connection Routes in the MGX Network
Setting Up the Router Processor Module (RPM)
Creating Virtual Circuits on the RPM
...''

Please go to the school's official website for training price and schedule:
http://www.nts.eu.com

Phone:+44 (0)1628 477 044

School Address:

Network Training Solutions
74 High Street
Marlow, Bucks
SL7 1AH
England

Office: +44 (0)1628 477 044
Fax: +44 (0)1628 482 431
Email: sales@nts.eu.com
Website: www.networktrainingsolutions.com


Jobs & Resumes: Marlow
Houses & Roommates: Marlow




Other training courses offered by Network Training Solutions:

BPX Switch Service Configuration v3.1
Cisco WAN Manager Installation and Operation v15.0
Installing Cisco WAN Switches v3.2
Implementing Multiprotocol Label Switching v2.3
MGX ATM Concentrator Configuration v4.0
Multiband Switch and Service Configuration v3.0
MGX Voice Gateway Configuration and Operations v1.1
Cisco PSTN Gateway Call Control Product Training v3.1


Notice: The course description on this page was captured from the Internet as historical reference or submitted by visitors. It was archived statically and not updated from day to day.
 


Tips:
Our combined search function does not only provide you with the training courses and students, but also talent resumes and jobs, or shared apartments nearby for rent.



Finding any course, anywhere to learn...
Worldwide training course directory, linking for free
United States - United Kingdom - Australia - CanadaASKEDU.net  © 2003-2008