Instrumentation Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Instrumentation




Total 581 training courses and degree programs available around the world.

Industrial Instrumentation Mechanic (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Lights College
Training Center(s)/Venue(s): Dawson Creek, Canada
  V

Industrial Instrumentation Mechanics install, repair, maintain, and adjust instruments used to measure and control industrial processes such as pulp and paper manufacturing and petrochemical production. They diagnose faults and perform preventative maintenance by inspecting and testing the instruments and systems in use. These types of instruments are typically used for controlling factors such as: flow of gases or liquids, temperature of materials or stages of a process, pressure maintained during a process, or level of a material used or created during a process.

If a student is just starting training, or has been unable to secure employ­ment in industry as an Industrial Instrumentation Mechanic, enrolling in a Foundation Trades Training program is a viable option prior to entering into an Apprenticeship.

This program prepares students for entrance into the field of Industrial Instrumentation Mechanic by providing them with the basic knowledge, skills and technical training employers are seeking. Graduates receive credit for Level 1 technical train... [Read More]

Instrumentation and Controls

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Vancouver Island University
Training Center(s)/Venue(s): Nanaimo, Canada

An introduction to instrumentation, process measurement, basic control loop components, boiler water level, combustion, and programming controls, and heating boiler and heating system controls.

Industrial Automation and Instrumentation Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Ampere systems & technologies.
Training Center(s)/Venue(s): hyderabad, india
  V

Course contents:
Module 1 : PLC Details
History of PLC, difference between relay, contactor &, PLC logic, PLC architecture. A detail
description of different PLC modules &, cards.

Module 2 : I/O configuration &, Memory Mapping
Why I/O configuration is required? How the I/O modules are addressed for different PLC’,s.

Module 3 : Programms &, Ladder diagrams
First steps with the programming device, introducing the basic ladder logic
instructions, contacts, coils, and PLC scan.

Module 4 : The instruction Set
A look at the instructions covered in all the PLC.Each instruction being illustrated by
application specific program examples.The instructions covered are:-
NO/NC, Set, Reset, Timers, Counters, Comparison, Arithmetic, Logical &, Move functions

Module 5: Communications &, fault finding
An introduction to communication options available for the type of PLCs includes also
how to find hardware faults and probable causes.

Biomedical Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Milwaukee School of Engineering
Training Center(s)/Venue(s): Milwaukee, United States
  V

This course focuses on the fundamental devices, circuitry and techniques needed to acquire and process biomedical quantities and signals. The application of displacement, force and pressure transducers in the conversion of physical quantities to electrical signals is discussed. Operational amplifiers are introduced and used in amplifier and filter circuits to process the signals. Non-ideal op amp properties, including finite gain, frequency response, stability, input and output resistances, bias currents and offset voltages, are treated in sufficient depth to permit design of high gain circuits capable of handling small DC and low frequency AC voltages. Transmission of physical variables through a medium to a sensor is treated in the case of an indwelling arterial catheter and pressure transducer.

Biomedical Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Marquette University Graduate School
Training Center(s)/Venue(s): Milwaukee, United States
  V

Explores relationships between instruments for physiologic measurement and monitoring with living systems. Physiologic signals, noise, and available sensors and transducers and their characteristics are discussed from time and frequency domain points of view. Systems topics include various new and conventional medical instrumentation. Other topics include clinical and new clinical laboratory instrumentation, instrumentation for research, artificial organs and prostheses. Includes the use of scientific literature, literature searches, design projects, computer projects.

Embedded Biomedical Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Marquette University Graduate School
Training Center(s)/Venue(s): Milwaukee, United States

Fundamentals of digital circuit design and analysis and the application to embedded biomedical instrumentation. Topics include microprocessor principles and programming and system design constraints for medical electronics. Laboratory provides applications of concepts introduced in class.

Vitros Instrumentation Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The Michener Institute for Applied Health Sciences
Training Center(s)/Venue(s): Toronto, Canada

Understand the principles of measurement and routine operation of the Ortho Clinical Diagnostics Virtros 250 analyzer.

This workshop uses a “hands-on?approach to provide you with practical exposure to laboratory techniques and clinical instrumentation, specifically the Vitros 250 analyzer.

Instrumentation Skills

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Lawrence College
Training Center(s)/Venue(s): Kingston, Canada


This course consists of two main modules. There first provides the student with a range soldering skills discreet electronic, and printed circuit board). The student will assemble and test a printed circuit board. In addition, a mandatory WHMIS training session will be arranged for students in this course.

Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Lawrence College
Training Center(s)/Venue(s): Kingston, Canada
  V


This course will provide you with an introduction to instrumentation and to the two common processes and the equipment used to measure them. Initially you will demonstrate an understanding of the terminology, units of measurement and the documentation methods used in the industry. Secondly you will demonstrate an understanding of pressure and temperature and the instruments used to measure them.

Computers, Controls & Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Clair College
Training Center(s)/Venue(s): Windsor, Canada
  V

This course is taught to the fourth class engineering standard and begins with basic electricity concepts, Ohm’s law, Watt’s law, magnetism and electromagnetism. Motors, generators and transformer construction, operation and maintenance is covered. The student is introduced to electrical meters and metering devices. An introduction to electrical schematics and building power distribution diagrams is covered. The course then covers power plant controls and instrumentation. Concepts in this area include process computer applications, process easurement, control loop components. The student is also introduced to building automation systems.

Instrumentation and Control Technician (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fleming College
Training Center(s)/Venue(s): Cobourg, Haliburton, Lindsay, Peterborough, Canada
  V

As an Instrumentation and Control Technician your career will be technology-based with an applied edge.

This four-semester Ontario College Diploma program will prepare you for a hands-on, exciting and rewarding career in emerging engineering and scientific fields. You will also learn required skills in communications, mathematics, science, and critical thinking to enhance your knowledge and skills for application in the workplace.

Work Experience
The program features an optional, paid 15-week co-op following semester 2. This allows you to build on your academic education, experience the work environment and make valuable contacts in one of the many diverse industries requiring instrumentation technician professionals. In addition to tuition and fees, students pay a co-op fee (approximately $468.00) for administrative costs associated with the co-op placement.

Career Opportunities
Graduates will obtain employment in industries that use automated or controlled technology systems, such as are found in the manufacturing, petro-chemical... [Read More]

Instrumentation and Process Control

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Sheridan College
Training Center(s)/Venue(s): Brampton, Mississauga, Oakville, Canada
  V

Students are introduced to the concept of Instrumentation and Process Control. Process control begins with the measurement of process variables. The measured variable is transmitted to a controller that compares the desired set point and takes the appropriate action. Students focus on various aspects of instrumentation to measure variables and how this instrumentation is used in the field of process control. The instrumentation includes electrical devices, both analog and digital, pneumatic devices, hydraulic devices and mechanical devices. Students achieve the understanding of physical variables such as pressure, current, voltage, level, flow and humidity. Students experience hands-on applications and practical aspects of instrumentation and process control through some laboratory exercises.

Pages: 1 2 3 4 5 6 ...


Find Instrumentation training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Facts:
We serve the schools and students around the world. Major visitors come from India, United States, United Kingdom, Canada, Australia, Philippines, Malaysia, Singapore and South Africa.



Automation
Instrumentation
- Online/E-learning -
Instrumentation
Ask for Training
Add Courses