Fiber Optics Training Courses in Australia

Schools providing training courses, certificates, diplomas or degree programs of Fiber Optics in Australia




Total 17 training courses and degree programs available in Australia.

Cisco ONS 15454 MultiService over SONET/SDH Basic Provisioning and Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: iT Learning Solution
Venue(s): Adelaide, Brisbane, Darwin. Melbourne, Perth, Australia
  V

After completing this course the delegate should be able to:

Identify the major components and functions of the Cisco ONS 15454 MSOS products
Install hardware and software
Provision a UPSR or SNCP network
Provision an E-series Ethernet circuit
Provision an ML-series hub and spoke Ethernet
Architecture

Provision an ML-series share packet ring Ethernet architecture
Identify types of IP addressing and common IP addressing scenarios
Course Content
The ONS 15454 is a powerful optical platform that lowers the cost and increases the efficiency of bandwidth delivery within optical transport networks. The Cisco Multi-service over SONET/SDH products includes the Cisco E-series, G-series and ML-series line cards for the ONS 15454. The ONS 15454 MSOS products are designed to extend the Ethernet and IP networking functionality of the Cisco ONS 15454 optical transport platform.
This course provides instructor-led training that enables the delegate to learn how to operate these products through classroom instruction and hands-on training on an ONS 15454 network. This course includes an overview of data networking concepts including an introduction to Cisco’s Internetwork operating system (IOS). Delegates without a data background will learn to ... [Read More]

Cisco ONS 15454 ML-Series Metro Optical Ethernet

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: iT Learning Solution
Venue(s): Adelaide, Brisbane, Darwin. Melbourne, Perth, Australia
  V

After completing this course the student should be able to:

Describe the position of the Cisco ONS 15454 ML-Series cards in the data and telephony network.
Specify a network configuration for multi-layer Ethernet services using the ONS 15454based on a given set of requirements.
Specify equipment and connections at the network and node levels per application.
Identify the components and equipment that comprise Cisco Metro Ethernet.
Describe the Metro Ethernet deployment alternatives and list differences between them.
Describe the positioning of the ML-Series within the Cisco Metro Ethernet network
Describe Ethernet Wire Service (EWS).
Specify EWS configuration and connections at the networkand node levels.
Specify a network configuration for multi-layer Ethernet services using the ONS 15454 based on a given set of requirements.
Specify equipment and connections at the network and node levels per application.
Course Content
The Cisco ONS 15454 ML-Series Metro Optical Ethernet Training is a four-day class providing instructor-led training that enables the student to learn how to operate and use the multiservice data transport functions of the Cisco ONS 15454. Through classroom instruction and hands-on training in small groups, studen... [Read More]

Cisco ONS 15454 SDH Turn Up, Test, Provisioning and Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: iT Learning Solution
Venue(s): Adelaide, Brisbane, Darwin. Melbourne, Perth, Australia
  V

The Cisco ONS 15454 SDH is a fast and powerful, yet easy to use optical platform that lowers the cost and increases the efficiency of bandwidth delivery within optical transport networks. The Cisco ONS 15454 SDH Provisioning and Operation Training provides instructor-led training that enables the delegate to learn how to operate the ONS 15454 SDH through classroom instruction and hands-on training.
A modified course is offered that includes an introduction to the Cisco ONS 15302 and Cisco ONS 15305 platforms. Delegates complete a wide range of tasks covering many system features and functions. Open lab periods provide delegates with opportunities to work with the system in an unstructured environment.

Course Outline
ONS 15454 SDH Product Overview
Synchronous Digital Hierarchy Overview
Safety
Optical Fiber
ONS 15454 SDH Documentation
ONS 15454 SDH Shelf Layout and Components
ONS 15454 SDH Shelf Installation
Lab: ONS 15454 SDH Shelf Installation
Lab: ONS 15454 SDH Card and Fiber-Optic Cable Installation
ONS 15454 SDH System Set-Up
Lab: ONS 15454 SDH System Set-Up and Login
ONS 15454 SDH Timing
Lab: Set up ONS 15454 SDH Timing
ONS 15454 SDH Protection Groups
Lab: Create ONS 15454 SDH Protection Groups
ONS 15454 SDH ... [Read More]

Optical fibre endorsement (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Wodonga Institute of TAFE
Venue(s): Wodonga, Australia

This course is suitable for electricians, data cablers, telecommunications personnel, computer systems technicians, and cable TV installers who want to enter into the business of optical fibre cabling endorsement.

Fibre Optics Communication Systems

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The Australian National University
Venue(s): Canberra, Australia
  V

Basic understanding of optical transmission systems concentrating on light propagation along fibres and light processing using fibre- and planar waveguide devices. Light propagation including modal propagation, and Maxwell’s equations; ray tracing; Snell’s and Fresnel’s laws; special fibres; planar waveguide propagation; light processing devices including optical amplifiers and attenuators.

Cisco ONS 15454 MultiService over SONET/SDH Basic Provisioning and Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fast Lane Australia
Venue(s): Sydney, Australia
  V

After completing this course the delegate should be able to:

Identify the major components and functions of the Cisco ONS 15454 MSOS products
Install hardware and software
Provision a UPSR or SNCP network
Provision an E-series Ethernet circuit
Provision an ML-series hub and spoke Ethernet
Architecture

Provision an ML-series share packet ring Ethernet architecture
Identify types of IP addressing and common IP addressing scenarios
Course Content
The ONS 15454 is a powerful optical platform that lowers the cost and increases the efficiency of bandwidth delivery within optical transport networks. The Cisco Multi-service over SONET/SDH products includes the Cisco E-series, G-series and ML-series line cards for the ONS 15454. The ONS 15454 MSOS products are designed to extend the Ethernet and IP networking functionality of the Cisco ONS 15454 optical transport platform.
This course provides instructor-led training that enables the delegate to learn how to operate these products through classroom instruction and hands-on training on an ONS 15454 network. This course includes an overview of data networking concepts including an introduction to Cisco’s Internetwork operating system (IOS). Delegates without a data background will learn to ... [Read More]

Cisco ONS 15454 ML-Series Metro Optical Ethernet

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fast Lane Australia
Venue(s): Sydney, Australia
  V

After completing this course the student should be able to:

Describe the position of the Cisco ONS 15454 ML-Series cards in the data and telephony network.
Specify a network configuration for multi-layer Ethernet services using the ONS 15454based on a given set of requirements.
Specify equipment and connections at the network and node levels per application.
Identify the components and equipment that comprise Cisco Metro Ethernet.
Describe the Metro Ethernet deployment alternatives and list differences between them.
Describe the positioning of the ML-Series within the Cisco Metro Ethernet network
Describe Ethernet Wire Service (EWS).
Specify EWS configuration and connections at the networkand node levels.
Specify a network configuration for multi-layer Ethernet services using the ONS 15454 based on a given set of requirements.
Specify equipment and connections at the network and node levels per application.
Course Content
The Cisco ONS 15454 ML-Series Metro Optical Ethernet Training is a four-day class providing instructor-led training that enables the student to learn how to operate and use the multiservice data transport functions of the Cisco ONS 15454. Through classroom instruction and hands-on training in small groups, studen... [Read More]

Cisco ONS 15454 SDH Turn Up, Test, Provisioning and Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fast Lane Australia
Venue(s): Sydney, Australia
  V

The Cisco ONS 15454 SDH is a fast and powerful, yet easy to use optical platform that lowers the cost and increases the efficiency of bandwidth delivery within optical transport networks. The Cisco ONS 15454 SDH Provisioning and Operation Training provides instructor-led training that enables the delegate to learn how to operate the ONS 15454 SDH through classroom instruction and hands-on training.
A modified course is offered that includes an introduction to the Cisco ONS 15302 and Cisco ONS 15305 platforms. Delegates complete a wide range of tasks covering many system features and functions. Open lab periods provide delegates with opportunities to work with the system in an unstructured environment.

Course Outline
ONS 15454 SDH Product Overview
Synchronous Digital Hierarchy Overview
Safety
Optical Fiber
ONS 15454 SDH Documentation
ONS 15454 SDH Shelf Layout and Components
ONS 15454 SDH Shelf Installation
Lab: ONS 15454 SDH Shelf Installation
Lab: ONS 15454 SDH Card and Fiber-Optic Cable Installation
ONS 15454 SDH System Set-Up
Lab: ONS 15454 SDH System Set-Up and Login
ONS 15454 SDH Timing
Lab: Set up ONS 15454 SDH Timing
ONS 15454 SDH Protection Groups
Lab: Create ONS 15454 SDH Protection Groups
ONS 15454 SDH ... [Read More]

Fiber-Optic Communication Systems

Course Format: Online / Virtual / E-learning
School/Trainer: IIT Armour College of Engineering

Physics of optical fiber, composition, dimensioning, coupling, attenuation, dispersion. Electro-optical conversion devices. (ILDs, LEDs, APDs, PINs). Circuit considerations. Modulation techniques and implications. Overall system considerations. Coherent techniques.

Fiber Optic Installation Technician

Course Format: Online / Virtual / E-learning
School/Trainer: Phoenix College Downtown
  V

Fiber Optic Installation and Testing Program is for those who want to become qualified Fiber Optic Technicians. This program will provide the knowledge to install or extend fiber optics signals for such systems as Commercial and Industrial Communications and Networking, Ethernet, Structured Cabling Systems, CCTV in the Industrial or Commercial Business, Colleges and Universities, Plant Floor, and Intelligent Building (Building Automation), just to name a few. There are many career fields open for those who know how to install fiber optics. In the industrial arena, cars and trucks are made by robotics operated by fiber optics. Career opportunities also exist for installers of medical equipment such as X-Ray machines.

This program starts off at the beginner level for those just entering this industry. It also serves as a guide for technicians, contractors, supervisors, network technicians, electricians and low voltage installers wanting to keep up with all of the latest industry techniques, standards and practices.

Pages: 1 2


Find more about Fiber Optics training courses, certificates, diplomas and degrees:





Tips:
Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.
United States  United Kingdom  Canada  Australia



Fiber
Fiber Optics
- Online/E-learning -
Fiber Optics
- On Campus -
Training Course Catalogs
Ask for Training
Add Courses