Training School:
Jobs & Resumes: Alexandria
Houses & Roommates: Alexandria
Total 348 program(s)/course(s) available.
Maxillofacial Surgery ...
Oral Surgery...
Conservative Dentistry...
Heavy Chemicals IndustriesManufacture of some heavy chemicals as sulfuric acid, hydrochloric acid, nitric acid, sodium hydroxide, sodium carbonate and sodium chloride, mass and energy balances in the industries, case studies.
...
Organic CoatingPrinciples of film formations –oils for coating �varnish resines �volatile solvents –colorants-alkyd resins �urea and melamine resins �Rubber-vinyl �Acrylics-silicon resins....
Metal Casting And WeldingMolten metals �liquid-solid operations �metalurgy of casting metals (aluminum, copper, steel, cast iron) �cast defects �melt welding �weld joints �compression welding �defects of weld joints.
...
Bio-Chemical EngineeringFermentation of amino acids �biocatalysm �production to plant cell �treatment of liquids �biosafety �biological processes and health care �Bioreactors �Biotensing �technologies of processes.
...
FuelCoal, combustion calculations, composition of flue gases, incomplete combustion and efficiency of boilers, heating value, testing of liquid fuels (viscosity, flash point, volatility, octane and cetane numbers, diesel index, residual carbon), fuel pollutants (S), gas fuels (natural gas, LPG, blast furnace gases, coke oven gases, water gas).
...
Petrochemicals TechnologyReactions of H2 and CO, oxidation of olefins, chlorination of paraffins, nitration of parafins, manufacture of olefins, hydration of olefins, oxidation of olefins, chlorine and bromine compounds, diolefines, aromatics and naphthenes....
Petroleum Refining EngineeringAtmospheric distillation, vacuum distillation, treatment of distillates, raising the octane number, desulphurization, isomerization, thermal and catalytic cracking, coking, uses of different distillates.
...
Forming And Welding Of PlasticsManual methods -viscosity reacting fluids-thermosets reaction �Compression molding thermal processes �sources of heat �die materials �properties of processed products-Blow molding: rehologicel properties –welding: Continuous �dialectics methods-hedges welding �hearing elements �subsonic welding �solvent welding.
...
Extrusion Of PlasticsThe extruder and its components, flow equations, single extruders, velocity distribution in flow channels, equations representing melt extrusion, isothermal operation, efficient operation.
...
Fiber Formation EngineeringCrystallization under tension, heat treatment, internal structure of fibers, engineering problems, spinning from melts and solutions, analysis of spinning operation variables.
...
Chemical Reaction EngineeringNon-ideal flow (residence time distribution, mixing model( mixing of fluids, reactor design for heterogeneous systems, non-catalytic reactions of fluids with solid surfaces, reaction rate for constant volume spheres and that of decreasing volume, controlling step, design applications.
...
Chemical Analysis Instruments And Safety EngineeringA. Chromatography, spectral analysis, analysis by X-ray, atomic absorption, DTA. B. Basics of fire and explosion, dangerous materials (flammable liquids, toxins, burning materials, oxidizers and propagators), dangerous operations (storage and transport and industrial operations), safe design for buildings and industrial stores, fire protection systems, protection from explosions, accidents insu......
Applied MicrobiologyMicro-organisms (types, classes, effect on life), bacteria, enzymes and yeasts (methods of multiplication, nutrition need, its biochemistry), preparation of bacteria and fungus and its identification, sterilization, fermentation industry.
...
Biotechnology In Pollution ControlAnalysis of industrial liquid wastes, BOD and COD and its determination, characteristics of some industrial liquid wastes, tertiary treatment, types and activity of micro-organisms used in industrial liquid wastes, methane bacteria and treatment of agricultural wastes, use of micro-organisms acting on sulfur and phosphors in pollution control, aeration and oxidation methods, bio-energy and biog......
Treatment Of Industrial Gaseous PollutantsRemoval of dusts (sedimentation chambers, cyclones, bag filters, electrostatic precipitators, scrubbing towers, filtration), removal of polluting gases (absorption, adsorption, incineration, pyrolysis, cooling and condensation, chemisorption, chemical scrubbing, case studies....
Treatment Of Industrial Liquid WastesSystems of collecting liquid wastes, biological characteristics of raw waters and industrial liquid wastes (bacteria, fungai, BOD) primary methods of treatment (sedimentation, bio-filtration, bio-aeration, stabilization ponds, aerobic and anaerobic digestion). Advanced treatment techniques (removal of suspended matter, nitrification and denitrification, removal of dissolved matter) reuse of wat......
Statistical Analysis In Chemical EngineeringSample volume and random variables, modern and conditioned distributions, special distributions, square ki distribution, binomial F&T distributions, Poisson and engineering distributions, point and steps evaluation
...
Pages:- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
School Index A~Z: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Tips:
Try the search form on top of each page to find the latest course information, using course topic and location as keywords. Keep the course topic keyword short to get more results. |
|
|
