Training Course Index
Training Schools
Locations | Schools | Online Courses | MBA | Submit Course | Post Request | Students | Jobs | House Rental

 


Jobs & Resumes

House Rental

Back | Home

Training School:

Element K About
Rochester, New York, United States
http://www.elementk.com/

Jobs & Resumes: Rochester
Houses & Roommates: Rochester
Travel Agencies: Rochester


Total 324 program(s)/course(s) available.

Traffic Control (Flagger)

The student will recognize general guidelines for traffic control, the signs, barriers, flags, stop/slow paddle and lights used at the work site, clothing regulations, and how to properly position himself/herself for optimum safety. The student will also identify how to judge traffic speed and congestion and regulate traffic accordingly. Objectives: In this course, you will identify the ......
 

Slips, Trips, and Falls

In this course, you will learn to identify safe and correct methods for using portable ladders and scaffolds. Objectives: In this course, you will learn to identify the correct safety procedure for good housekeeping practices, using ladders, and working on elevated work surfaces. ...
 

Scaffold Safety

Each employee working around scaffolds will recognize definitions and types of scaffolds, the potential hazards connected with their use, including electrical, structural instability, falls, and falling objects, and will demonstrate proper use of procedures required for working on or near scaffolds.This course is targeted at all employees who would be working using scaffolds, or would be superv......
 

Personal Protective Equipment

The goal of this course is to teach the expectations and requirements to use equipment to protect them from work-related illness and injury.This course is targeted at all employees working in industries who can succumb to work related accidents, if proper precaution is not taken. Objectives: In this course, you will protect yourself from work-related illness and injury by demonstrating h......
 

Safety Audits

The goal of this lesson is to provide awareness training for managers, supervisors, and general employees on the importance of safety audits and how to plan and conduct an audit.This training is for managers, supervisors, and general employees who may be involved in conducting a safety audit. Objectives: In this course, you will understand the importance and objectives of a safety audit ......
 

Radio Communications

This course emphasizes the importance of radio operator training. Efficient radio communication plays a pivotal role in many industries thus making this kind of training all the more imperative. Radio communication system functions under the purview of The Federal Communications Commission. Radio operators must follow the rules and regulations laid by the federal authority. This course enables ......
 

Process Safety Management

The goal of this course to provide awareness training on "highly hazardous" chemical processes and the importance of having and following certain procedures to prevent or minimize the release of these chemicals.This course is designed for all employees. Objectives: In this course, you will identify the hazards involving highly hazardous chemicals, define a chemical process, and......
 

Overhead and Gantry Crane Safety

The goal of this course is that all employees operating bridge cranes will be able to identify the requirements for inspection, operational testing, proper rigging and lifting procedures, and other safety practices relevant to crane operation. Objectives: In this course, you will identify the required steps for inspecting crane equipment, pre-operation testing, and the requirements for l......
 

Machine Guarding

This course covers the mechanical hazards associated with machinery use and the safeguarding requirements for those machines. It also covers methods for machine guarding, types of machine safeguards and safe practices for working around them, including PPE use and training requirements. Objectives: In this course, you will define mechanical hazards, identify the requirements for a safegu......
 

Lockout/Tagout

Most modern equipments are powered by electrical, mechanical, hydraulic, high-pressure air, and steam sources. In such cases, locks and tags play a crucial role when maintenance and repair operations have to be performed on these equipments. This course will help you to identify what locks and tags look like, understand their purpose and limitations, and know your responsibility under a lockout......
 

Ladder Safety

In this course, you will identify common terms associated with work on ladders, recognize the hazards inherent with ladder work, and incorporate general safe practices to reduce or eliminate these hazards. You will also recognize the fall protection requirements associated with ladder work, and when, as well as how, to inspect ladders. Objectives: In this course, you will identify common......
 

Laboratory Safety

The goal of this lesson is to provide required awareness training in the occupational hazards common to most laboratory operations, safe work practices to help reduce or eliminate exposure to these hazards, special equipment and precautions to ensure personal safety, and the correct response to emergency situations in laboratories. Objectives: In this course, you will learn about the haz......
 

Indoor Air Quality

This lesson defines indoor air quality, explains the consequences of contamination, and covers the causes and sources of major indoor air contaminants. It also covers health effects and major risks of contamination, and how exposure controls help maintain good indoor air quality. Objectives: In this course, you will learn the meaning and contamination risks of indoor air quality, the cau......
 

Incident Investigation

This lesson covers the purpose for conducting an incident investigation, the procedures to follow, and what information should be determined during the investigation. It also covers who to interview, how to properly conduct the interview, and how to complete an investigation report and recommend corrective action following the investigation. Objectives: In this course, you will understan......
 

Hearing Conservation

Noise is an occupational hazard in a multitude of industry settings. It is the leading cause of hearing loss in workers who are exposed to high noise levels. You can mitigate the effects of noise by diligently and routinely taking safety precautions your company has set in place. Objectives: In this course, you will identify the factors that determine the extent of hearing loss, the nois......
 

Hot Work with Arc Welding

In this course, you will identify the hazards of hot work and the basic requirements for reducing the risk of injury. You will also explore equipment safety, protective equipment and precautions, and appropriate safety practices for hot work.This training is intended for employees who are exposed to hot work hazards in the course of their work. Objectives: In this course, you will identi......
 

Hazard Communication

Everyday, we come in contact with potentially hazardous chemicals. Because serious accidents have occurred as the result of improper use of these chemicals, OSHA has implemented the Hazard Communication Standard. The purpose of this law is to inform employees, employers, and the general public about chemical hazards in the workplace. There are six major categories of the Hazard Communication St......
 

Hand and Power Tool Safety

In this course, you will identify general hazards associated with hand and portable power tool use, and the safety practices for protecting against these hazards. You will also identify appropriate safety practices.Each employee using hand and portable power tools will recognize definitions and types of portable tools, the potential hazards connected with their use, including manual, electric, ......
 

Forklift Operator: Safe Driving Practices

In this course, you will demonstrate awareness of safe forklift operation principles by identifying basic key features on the lift, recognizing the technical components of forklift operation, listing safe load handling and driving practices, stating general safety rules, and inspecting and maintaining lift equipment. Objectives: In this course, you will demonstrate awareness of safe fork......
 

Forklift Operator

Recognize the general types of forklifts and its basic features.This course is designed for forklift operators.A general understanding of forklift types and features is necessary for a smooth and safe forklift operation. This course will enable you to get a fundamental knowledge about forklifts. You will also be able to recognize the basic factors differentiating forklifts, the parts of a forkl......
 


Pages:- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...

School Index A~Z: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z



Tips:
ASKEDU jobs and talents message board can help you find jobs related to your experience in a specific city, or hire somebody in place with particular knowledges.

Colleges in New York
Berkeley College
Briarcliffe College
Bryant & Stratton College Online Education
Career Skills Institute
Columbia University Department of Computer Science
Columbia University School of Continuing Education
Cornell University
Cornell University School ILR
French Institute Alliance Francaise New York City
International Institute for Learning, Inc.
ITT New York College in Getzville - Buffalo
Lyceum Kennedy Language Institute
Metropolitan College of New York
Monroe Community College
New School University
New York College in Liverpool - Syracuse
New York Institute of Photography
New York Technical College in Albany
New York University Leonard N. Stern School of Business
The College of Westchester
...
Finding any course, anywhere to learn...
Worldwide training course directory, linking for free
United States - United Kingdom - Australia - Canada - IndiaASKEDU.net  © 2003-2009