Fast Lane Australia
Sydney, NSW, Australia
http://www.flane.com.au/

Implementing Security Manager for Cisco Networks

Cisco Security Manager version 3.0 enables you to manage security polocies on Cisco security devices. SMN supports integrated provisioning of VPN and firewall services across IOS routers, PIX and ASA security appliances, and Catalyst 6500/7600 services modules (FWSM and VPNSM). Cisco Security Manager also supports provisioning of many platform-specific settings, as interfaces, routing, identity......
 

Upon completing this course, the learner will be able to meet these overall objectives: Identify different type of threats and attacks of Unified Communication infrastructure Identify different type of Layer 2 threats and attacks as well as configure Cisco Catalyst Switch to prevent these attacks Identify different type of Layer 3 threats and attacks as well as configure Cisco ASA Firewa......
 

Upon completing this course, the learner will be able to meet these overall objectives: Develop a comprehensive network security policy to counter threats against information security. Configure routers on the network perimeter with Cisco IOS Software security features. Configure a Cisco IOS zone-based firewall to perform basic security operations on a network. Configure site-to-site VP......
 

Securing Networks Using Intrusion Prevention Systems (IPS) v6.0 is an update to Securing Networks Using Intrusion Prevention Systems (IPS) v5.0, an existing five-day instructor-led course on using the Cisco Intrusion Detection System v5.0 product to protect network systems from intrusions and security threats. The course covers important new IPS 6.0 features. The IPS 6.0 course takes a task-ori......
 

Upon completing this course, the learner will be able to meet these overall objectives: Configure policy NAT based on traffic type. Describe the layer 7 modular policy framework for the security appliance and how it is configured. Describe the layer 7 advanced protocol handling capabilities of modular policy frame and how it is configured. Determine the necessary configuration for the A......
 

Securing Networks with PIX and ASA (SNPA) v5.0 is an update to SNPA v4.0, an existing five-day instructor-led course on using the Cisco ASA and PIX Security Appliance software version 7.0 to protect network systems from intrusions and security threats. The SNPA 5.0 course introduces the new ASA 5505 and 5550 and covers important new ASA and PIX Security Appliance 7.2 features, including the fol......
 

Securing Networks with ASA Fundamentals (SNAF) v1.0 is an update to Securing Networks with PIX and ASA (SNPA) v5.0, an existing five-day instructor-led course on using the Cisco ASA and PIX Security Appliance software version 7.2 to protect network systems from intrusions and security threats. In order to cover new features of ASA software version 8.0 and preserve the 5-day length of the cour......
 

After completing this course the student should be able to: Secure a network using existing Cisco IOS security including Trust and Identy with Identity Based Networking Service; Network Foundation Protection including securing the Control, Management and Data Plane. Invoke Secured Connectivity with IPsec and VPNs, and implement Adaptive Threat Defense by configuring Cisco Classic and Zone......
 

Building on the Designing for Cisco Internetwork Solutions (DESGN) v2.0 course, the students will learn additional aspects of modular campus and edge network design, including high availability, security, quality of service (QoS), network management, data center, and IP multicast. In addition, the students will be able to design solutions for the network that are strategic to small, medium, and......
 

After completing this course the student should be able to: Discuss methodology in network design Describe how to structure and modularize the network design using the Cisco Enterprise Architecture Design the Enterprise Campus and Enterprise Data Center modules. Design the Remote Connectivity modules as needed. Design a network addressing plan and select a suitable routing protocol for a......
 

OSPF Overview The OSPF Protocols OSPF Backbone & Area Concepts Designing scalable OSPF Networks OSPF over Non-Broadcast Multi-Access (NBMA) Networks OSPF Features ...
 

After completing this course the student should be able to: Compare and contrast the various broadband aggregation architectures available with Cisco routers Explain how RBE and RFC 1483 routing work, describe their typical architectures and benefits, and configure them on Cisco routers Explain how PPPoA and PPPoE work, along with descriptions of their typical architecture and benefits, an......
 

After completing this course the student should be able to: Present the functions uses and capabilities of the C10000 series router Define the various leased-line access architectures that use the Cisco 10000 series Demonstrate a functional understanding of the C10000 series hardware components, their interconnection, dependencies and features Provide a functional description of the PRE a......
 

After completing this course the student should be able to: Recite the factors that drove the creation of a new IP structure and its possible usages. Fundamentally explain the operation of IPv6. Demonstrate theoretical and practical knowledge of IPv6 advanced concepts and uses respectively. Identify all the updates to IPv4 routing protocols needed to support IPv6 topologies. Implement IP......
 

The course moves from an overview of IS-IS technology, its structures and protocols as well as configuration examples to in-depth information on Integrated IS-IS. After completing this course the student should be able to: Describe the principles, concepts and data structures of link-state routing protocols List the prerequisites for the implementation of the IS-IS routing model in a networ......
 

After completing this course the delegate will be able to: Given a network scenario with multiple domains, configure, monitor and troubleshoot basic BGP to enable interdomain routing Given a network scenario where connections to multiple ISPs must be supported, use BGP policy controls to influence the route selection process with minimal impact on BGP route processing Given a network sce......
 

After completing this course the student should be able to: Describe how the service provider infrastructure is attacked Describe the features of MPLS Describe how MPLS labels are assigned and distributed Identify the Cisco IOS tasks and command syntax necessary to implement MPLS on frame-mode Cisco IOS platforms Describe the MPLS peer-to-peer architecture and explain the routing and p......
 

After completing this course the student should be able to: Identify the components of the Cisco Unity system, describe their standard and optional features, and explain and how they integrate into a unified messaging system Explain the need to implement Quality of Service (QoS) and explain methods for implementing and managing QoS Identify and describe different models used for ensuring......
 

Implementing Cisco Multicast provides students with in-depth knowledge of the IP multicast building blocks that make this new IP service deployable and attractive from a business perspective. Bandwidth and processing power are wasted when data is replicated and sent from a source to potential receivers multiple times. With IP multicast and a sophisticated group of protocols, the information is ......
 

Upon completion of this course, you should be able to: Describe advanced capabilites of routers (up to Cisco 7XXX) and switches (up to Catalyst 65XX). Use network management tools (esp. SSH, Syslog, NDP and Netflow Data Export). Prepare for or configure High Availability (including HSRP, VRRP, Layer 2 / Layer 3 tools, and NSF). Describe and configure MPLS (both frame mode and VPN implem......
 

Pages:- 1 2 3 4 5 6 7

School Index A~Z: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Tips: Besides Acquiring latest course information by the search form, Students can also leave their study interests here and let schools callback.