The Northern California Laborers Training Center
San Ramon, Sacramento, California, United States
http://www.norcalaborers.org/

Welding Orientation - TIG (Certificate)

To instruct the trainee in the proper setting, operation and shutdown of Tungsten Inert Gas (TIG) welding equipment. All procedures are done following the recommended safety guidelines according to the manufacturer’s instruction manual. Topics Covered Basic TIG welding techniques Oxy-fuel cutting Plasma cutting Safety procedures Tools and techniques ...
 

To instruct the trainee in the proper setting, operation and shutdown of Metal Inert Gas (MIG) welding equipment. All procedures are done following the recommended safety guidelines according to the manufacturer’s instruction manual. Topics Covered Basic MIG welding techniques Oxy-fuel cutting Plasma cutting Safety procedures Tools and techniques...
 

A continuation of the Basic Welding class. The trainees gain additional experience in the welding shop performing pipe welding with the goal of obtaining a pipe welding certification. Topics Covered Advanced pipe welding techniques Oxy-fuel cutting Plasma cutting Safety procedures Tools and techniques ...
 

To familiarize the trainee with the equipment and safety procedures of the welding shop, to instruct in the basics of welding and provide the opportunity to practice welding under the instructor’s supervision. Topics Covered Basic welding techniques Oxy-fuel cutting Plasma cutting Safety procedures Tools and techniques ...
 

The Traffic Control class familiarizes trainees with traffic control procedures and safety requirements to enable the participant to work in the traffic control environment. The class will provide a basic understanding of lane closure set-up and design. Topics Covered Principles of traffic control Safety requirements Traffic control devices and utilization Traffic control plans Regu......
 

Teach the trainee the safe set-up and operation of an oxy-fuel torch Topics Covered Safety procedures Proper equipment setup and use Hands-on use of torch equipment ...
 

Provide participants with orientation in the operation, safety procedures and maintenance of a Bobcat. Topics Covered Overview of basic operations and safety procedures Field operations (hands-on) Assorted attachments Maintenance and service ...
 

Provide participants with orientation in the operation, safety procedures and maintenance of a Bobcat. Topics Covered Overview of basic operations and safety procedures Field operations (hands-on) Assorted attachments Maintenance and service ...
 

Upon completion of the course, the user will be able to safely work on a scaffold, recognize hazards and be familiar with current OSHA standards. Topics Covered The four different types of scaffolding Types of work conduced on a scaffold Unsafe scaffold hazards OSHA regulations as they relate to scaffolding ...
 

To provide a wide range of safety training as it relates to the construction industry, including First-Aid/CPR, OSHA 500, aerial platform, flagger certification and traffic safety. Topics Covered OSHA 500 First-Aid/CPR Aerial Platform Safety Orientation Scaffold Orientation Forklift Certification Skid-Steer Loader (Bobcat) Orientation Flagger Certification Traffic Control Cert......
 

To make the trainee aware of the hazards and safeguards associated with work in refineries, chemical plants and other industrial facilities. Topics Covered Identifying potentially hazardous conditions Following safety procedures Proper use of personal protective equipment Working in confined spaces and other situations unique to working in industrial settings ...
 

To provide the trainee with a basic introduction of all the materials and work performances needed to perform the duties of plaster tendering and mason tending, including materials, tools and techniques. Topics Covered Proper use and building of scaffolding Forklift orientation Material identification Equipment safety, including proper use of mixer Pump safety EFIS (Exterior Foam ......
 

Teach the trainee the principles of pipe laying and shoring. Topics Covered Pipe laying Grade checking Trench safety Shoring Rules and regulations as they relate to trenching Compaction Tools and techniques...
 

To familiarize the trainee with the federal Occupational Safety and Health Administration (OSHA) standards as they relate to the construction industry. Topics Covered General Duty Clause Electrical Fall protection Material handling Scaffolding, stairways and ladders...
 

Provides participants with a basic overview of the hazards and work procedures as they relate to the containment and removal of mold. Topics Covered Indoor air pollution and “sick building�syndrome Health effects of mold Hazard communication Personal Protective Equipment (PPE) Work area preparation Decontamination Work sampling Safety procedures ...
 

Provides participants with an overview of the Californina Department of Health Services requirements and safety procedures as they relate to the containment and removal of lead-based paint. Topics Covered Any updates to state regulations as they apply to the containment and removal of lead-based paint. Personal protective equipment Encapsulation Waste disposal Medical surveillance ......
 

Provides participants with a basic overview of the hazards and work procedures as they relate to the containment and removal of lead. Topics Covered Health effects of lead State and federal regulations relating to lead Sampling methods Hazard communication Personal Protective Equipment (PPE) Safe work practices Abatement methods ...
 

Provide an overview of federal regulations (Sec. 29 CFR 1910.120) as they relate to the containment and removal of hazardous waste. The course includes information on hazardous waste operations and emergency response. Topics Covered Any updates to the Code of Federal Regulations as they apply to the removal of Hazardous Waste Emergency Action Response Hazard Communication Standard P......
 

Provide an overview of federal regulations (Sec. 29 CFR 1910.120) as they relate to the containment and removal of hazardous waste. The course includes information on hazardous waste operations and emergency response. Topics Covered The Code of Federal Regulations as they apply to the removal of Hazardous Waste Emergency Action Response Hazard Communication Standard Personal protectiv......
 

Teach trainee the principles of transferring grade. Topics Covered Conversions of inches to tenths Proper use of eye-level Proper use of builder’s level Proper use of engineer’s rule Proper use of laser Reading survey stakes Proper use of a hub ...
 

Pages:- 1 2

School Index A~Z: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Tips: Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.