Mechanic Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Mechanic




Total 600 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Autodesk Simulation Mechanical Part 2

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): North Adelaide, Australia
  V

This course assumes you have a working knowledge of the Autodesk Simulation user interface and basic FEA theory. It is recommended that you attend the Autodesk Simulation Mechanical Part I course prior to attending this class. Many people choose to take both Part I & II in the same week.
Prerequisites
Autodesk Simulation Mechanical or Multiphysics users that need to see how mechanisms interact with each other over time. You will leave this course understanding how to analyze for stress and deformation under realworld operating conditions.

Autodesk Simulation Mechanical Part I is a prerequisite for this course.

Autodesk Simulation Mechanical Part 1

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): North Adelaide, Australia
  V

You will learn about meshing, loads, and constraints for each of the covered analysis types. Most importantly, you will learn how to evaluate the results. You will also learn how to create custom presentations and reports of the results. This course is a prerequisite to Autodesk Simulation Mechanical Part II, where large scale motion, large deformation, large strain with contact, and non-linear material models are covered.
Prerequisites
New users of Autodesk Simulation Mechanical or Multiphysics. Prior FEA experience is not necessary.

Autodesk Simulation Mechanical Part 1

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Mount Waverley, Australia
  V

You will learn about meshing, loads, and constraints for each of the covered analysis types. Most importantly, you will learn how to evaluate the results. You will also learn how to create custom presentations and reports of the results. This course is a prerequisite to Autodesk Simulation Mechanical Part II, where large scale motion, large deformation, large strain with contact, and non-linear material models are covered.
Prerequisites
New users of Autodesk Simulation Mechanical or Multiphysics. Prior FEA experience is not necessary.

Autodesk Simulation Mechanical Part 1

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Botany, Australia
  V

You will learn about meshing, loads, and constraints for each of the covered analysis types. Most importantly, you will learn how to evaluate the results. You will also learn how to create custom presentations and reports of the results. This course is a prerequisite to Autodesk Simulation Mechanical Part II, where large scale motion, large deformation, large strain with contact, and non-linear material models are covered.
Prerequisites
New users of Autodesk Simulation Mechanical or Multiphysics. Prior FEA experience is not necessary.

Autodesk Inventor Advanced Part Modeling

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Mount Waverley, Australia
  V

In this training guide, we consider various approaches to part design and emphasize useful strategies. Specific advanced part modeling techniques covered include multi-body design, advanced lofts, advanced sweeps, coils, and surface modeling. Additional material aimed at increasing efficiency is also included: iFeatures for frequently needed design elements, iParts for similar designs, iLogic for automating designs, translation options for importing data, and the Engineer’,s Notebook for communication. The guide also covers some miscellaneous drawing tools such as custom sketches symbols, working with title blocks and borders, and documenting iParts. With an understanding of these tools, students can begin to streamline the design and documentation process.

The major topics covered in the Training Guide are:

Advanced model appearance options
Multi-body part modeling
2D and 3D sketching techniques
Advanced geometry creation tools (work features, area lofts, sweeps, and coils)
Part creation using iLogic
Analysis tools
Creating and editing basic surfaces
Importing surfaces and surface repair tools
... [Read More]

Autodesk Inventor Advanced Part Modeling

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): North Adelaide, Australia
  V

In this training guide, we consider various approaches to part design and emphasize useful strategies. Specific advanced part modeling techniques covered include multi-body design, advanced lofts, advanced sweeps, coils, and surface modeling. Additional material aimed at increasing efficiency is also included: iFeatures for frequently needed design elements, iParts for similar designs, iLogic for automating designs, translation options for importing data, and the Engineer’,s Notebook for communication. The guide also covers some miscellaneous drawing tools such as custom sketches symbols, working with title blocks and borders, and documenting iParts. With an understanding of these tools, students can begin to streamline the design and documentation process.

The major topics covered in the Training Guide are:

Advanced model appearance options
Multi-body part modeling
2D and 3D sketching techniques
Advanced geometry creation tools (work features, area lofts, sweeps, and coils)
Part creation using iLogic
Analysis tools
Creating and editing basic surfaces
Importing surfaces and surface repair tools
... [Read More]

Autodesk Inventor Advanced Part Modeling

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Botany, Australia
  V

In this training guide, we consider various approaches to part design and emphasize useful strategies. Specific advanced part modeling techniques covered include multi-body design, advanced lofts, advanced sweeps, coils, and surface modeling. Additional material aimed at increasing efficiency is also included: iFeatures for frequently needed design elements, iParts for similar designs, iLogic for automating designs, translation options for importing data, and the Engineer’,s Notebook for communication. The guide also covers some miscellaneous drawing tools such as custom sketches symbols, working with title blocks and borders, and documenting iParts. With an understanding of these tools, students can begin to streamline the design and documentation process.

The major topics covered in the Training Guide are:

Advanced model appearance options
Multi-body part modeling
2D and 3D sketching techniques
Advanced geometry creation tools (work features, area lofts, sweeps, and coils)
Part creation using iLogic
Analysis tools
Creating and editing basic surfaces
Importing surfaces and surface repair tools
... [Read More]

Autodesk Inventor LT Fundamentals

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Botany, Australia
  V

Inventor LT interface
Creating 2D sketches
Constraining and dimensioning sketches
Generating 3D parts from sketches
Part modeling, adding and editing 3D features
Work Features
Model geometry and model display manipulation
Resolving feature failures
Feature duplication techniques
Establishing and working with model relationships
Model Information
Creating and annotating drawings and views

Prerequisites:
As an introductory training guide, Autodesk Inventor LT 2012 Fundamentals does not assume prior knowledge of any 3D modeling or CAD software. Students do need to be experienced with the Windows operating system and a background in drafting of 3D parts is recommended.

Autodesk Inventor LT Fundamentals

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): North Adelaide, Australia
  V

Inventor LT interface
Creating 2D sketches
Constraining and dimensioning sketches
Generating 3D parts from sketches
Part modeling, adding and editing 3D features
Work Features
Model geometry and model display manipulation
Resolving feature failures
Feature duplication techniques
Establishing and working with model relationships
Model Information
Creating and annotating drawings and views

Prerequisites:
As an introductory training guide, Autodesk Inventor LT 2012 Fundamentals does not assume prior knowledge of any 3D modeling or CAD software. Students do need to be experienced with the Windows operating system and a background in drafting of 3D parts is recommended.

Autodesk Inventor LT Fundamentals

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Mount Waverley, Australia
  V

Inventor LT interface
Creating 2D sketches
Constraining and dimensioning sketches
Generating 3D parts from sketches
Part modeling, adding and editing 3D features
Work Features
Model geometry and model display manipulation
Resolving feature failures
Feature duplication techniques
Establishing and working with model relationships
Model Information
Creating and annotating drawings and views

Prerequisites:
As an introductory training guide, Autodesk Inventor LT 2012 Fundamentals does not assume prior knowledge of any 3D modeling or CAD software. Students do need to be experienced with the Windows operating system and a background in drafting of 3D parts is recommended.

Autodesk Revit MEP Fundamentals

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): Botany, Australia
  V

The training guide is intended to introduce students to the software’s user interface and the basic HVAC, electrical, and piping/plumbing components that make Revit MEP a powerful and flexible engineering modeling tool. The objective is to familiarize students with the tools necessary to create, document, and print the parametric model. The examples and practices are designed to take you through the basics of a full Revit MEP project, from linking in an architectural model to construction documents.

Fundamental Topics:

Introduction to Autodesk Revit MEP, its interface, including viewing, drawing, and editing commands.
Working with linked architectural files.
Creating and modifying views.
Understanding Revit MEP systems in general.
Creating spaces and zones.
Analyzing heating and cooling loads.
Working with HVAC module to add air terminals, mechanical equipment, and create HVAC systems.
Working with the Piping module to add mechanical equipment as well as creating hydronic piping systems.
Working with fire protection systems.
Working with fixtures, piping systems and analysis tools in the Plum... [Read More]

Autodesk Revit MEP Fundamentals

Course Format: Classroom
School/Trainer: IMAGINiT Technologies
Training Center(s)/Venue(s): North Adelaide, Australia
  V

The training guide is intended to introduce students to the software’s user interface and the basic HVAC, electrical, and piping/plumbing components that make Revit MEP a powerful and flexible engineering modeling tool. The objective is to familiarize students with the tools necessary to create, document, and print the parametric model. The examples and practices are designed to take you through the basics of a full Revit MEP project, from linking in an architectural model to construction documents.

Fundamental Topics:

Introduction to Autodesk Revit MEP, its interface, including viewing, drawing, and editing commands.
Working with linked architectural files.
Creating and modifying views.
Understanding Revit MEP systems in general.
Creating spaces and zones.
Analyzing heating and cooling loads.
Working with HVAC module to add air terminals, mechanical equipment, and create HVAC systems.
Working with the Piping module to add mechanical equipment as well as creating hydronic piping systems.
Working with fire protection systems.
Working with fixtures, piping systems and analysis tools in the Plum... [Read More]

Pages: ...44 45 46 47 48 49 50


Find Mechanic training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Our combined search function does not only provide you with the training courses and students, but also talent resumes and jobs, or shared apartments nearby for rent.



- Other Topics -
- Online/E-learning -
Mechanic
Ask for Training
Add Courses