PLC Training Courses and Workshops

This workshop will give you a fundamental understanding of security in industrial networking and data communications technology.

It will also present you with the key issues associated with security in industrial communications networks and will assist managers, system operators and industrial data communications specialists setting up secure systems.

One completion of the workshop you will have developed a practical insight into how to achieve optimum industrial network security for your organisation.

Topics covered include: Introduction and terminology; firewalls; authentication, authorisation and anonymity; remote access to corporate networks; cryptography; VPN’s; data security; desktop and network security; security precautions in a connected world; and internet security.

At the end of this workshop participants will be able to:

Apply the fundamental concepts of industrial network security to your SCADA and automation systems
Conduct a preliminary analysis of your industrial networks and prepare to withstand and anticipate attacks and apply defences
Discuss the issues of Industrial Network security competently with your asso... [Read More]

The aim of the practical learning program is to provide you with core industrial automation skills. The program covers PLC, SCADA, VFD, Calibration, Engineering Drawings/Specification, Installation of instruments, Loop Checking, Logic Checking, Foundation Fieldbus technology, Segment design and Panel designing as well as new technologies and trends. There are eight modules running through the program to give you maximum, practical coverage in the field of industrial automation.

Course Details
Please kindly visit our websiteâ,€,™,s ",Training Division",, will give you more details about the course contents. The Program fee for one month is 15,000RS/-

The training program ",Certified Automation Professional", is designed for instrumentation and automation professionals who need to have practical knowledge of selection, installation and commissioning of industrial instrumentation devices and automated control systems.

The aim of the practical learning program is to provide you with core industrial automation skills. The program covers PLC, SCADA, VFD, Calibration, Engineering Drawings/Specification, Installation of instruments, Loop Checking, Logic Checking, Foundation Fieldbus technology, Segment design and Panel designing as well as new technologies and trends. There are eight modules running through the program to give you maximum, practical coverage in the field of industrial automation.

Course Details
Please kindly visit our websiteâ,€,™,s ",Training Division",, will give you more details about the course contents. The Program fee for one month is 15,000RS/-.

iTECH Protomation and Controls Pvt. Ltd
No.577, 11th Main Road, 5th Block,
Jayanagar, Bangalore, Karnataka-560041

Tel: 0091-80-42068740

Mob: 0091-9535097676

e-mail: trng@itechprot... [Read More]

Practical Exposure GE Fanuc PLC
Â,», Introduction to PLC programming software
Â,», Addressing concepts
Â,», Introduction to bit, byte & word concept
Â,», Programming instructions arithmetic and logical
â,€,¢,
Load /and /or/out / and Read / Write
â,€,¢,
MOVE block application
â,€,¢,
Compare / Add / Sub /And /Or - Blocks
â,€,¢,
Advanced instructions
â,€,¢,
Leading edge / trailing edge instructions
â,€,¢,
File handling
â,€,¢,
Timer Blocks programming
â,€,¢,
Comment functions
â,€,¢,
Master control /set /reset function
â,€,¢,
Counter Block programming
Â,», Upload, download, Monitoring of programs
Â,», Forcing I/P & O/P
Â,», Monitoring / Modifying data table values
Â,», Standard procedure to be followed in wiring / writing ladder etc
Â,», Hands on experience on writing programs

â,€,¢, Case studies for conveyer, motors control, timer & counter applications etc.
&... [Read More]

The training program Certified Automation Professional is designed for instrumentation and automation professionals who need to have practical knowledge of selection, installation and commissioning of industrial instrumentation devices and automated control systems.

The aim of the practical learning program is to provide you with core industrial automation skills. The program covers PLC, SCADA, VFD, Calibration, Engineering Drawings/Specification, Installation of instruments, Loop Checking, Logic Checking, Foundation Fieldbus technology, Segment design and Panel designing as well as new technologies and trends. There are eight modules running through the program to give you maximum, practical coverage in the field of industrial automation.

Course Details
Please kindly visit our websiteâ,€,™,s ",Training Division",, will give you more details about the course contents. The Program fee for one month is 15,000RS/-.

iTECH Protomation and Controls Pvt. Ltd
No.577, 11th Main Road, 5th Block,
Jayanagar, Bangalore, Karnataka-560041

Tel: 0091-80-42068740

Mob: 0091-9535097676

e-mail: trng@itechprotomation.com<... [Read More]

iTECH provides practical oriented training for industrial automation. Our training program Certified Automation Professional is designed for instrumentation and automation professionals who need to have practical knowledge of selection, installation and commissioning of industrial instrumentation devices and automated control systems. The aim of the practical learning program is to provide you with core industrial automation skills.

Also the in house Pilot Plant, which provides a realistic training environment where students can gain hands-on experience on the latest Process Control Instrumentation devices and the industrial automation controllers.

One month course contains eight modules. Which covers PLC,SCADA,VFD,Calibration,Foundation FieldBus,Eng Drawings/Spec’,s, Control Panel Design, Field Instrument Installation and commissioning.

Timings Mon to Fri 09:30 ~ 12:30

Please visit our website’,s training division for more details.

iTECH Protomation & Controls Pvt. Ltd
No.577, 11th Main Road, 5th Block, Jayanagar,
Bangalore, Karnataka-560041
Tel: 0091-80-42068740,
Mob: 0091-9535097676
e-mail: trng@itechprotomatio... [Read More]

We offer cources like PLC, SCADA, AUTOCAD, HVAC & also tuitions for B.Tech/M.Tech/B.Com/MBA. We provide 100% placements.

Training Division

The training program Certified Automation Professional is designed for instrumentation and automation professionals who need to have practical knowledge of selection, installation and commissioning of industrial instrumentation devices and automated control systems.

The aim of the practical learning program is to provide you with core industrial automation skills. The program covers PLC, SCADA, VFD, Calibration, Engineering Drawings/Specification, Installation of instruments, Loop Checking, Logic Checking, Foundation Fieldbus technology, Segment design and Panel designing as well as new technologies and trends. There are eight modules running through the program to give you maximum, practical coverage in the field of industrial automation.

General

Course Details
Please kindly visit our website’s ",Training Division",, will give you more details about the course contents. The Program fee for one month is 15,000RS/-

We offer standard training and custom made courses for maintenance, engineering or information management. Our courses are designed especially for your industry.
Trainings can be given on-site, regionally or in one of our training centre.
We issue officially recognised diplomas and training vouchers.

1. Training content:
· Introduction to PLC, control system
· Memory Organization
· Programming - Ladder Logic
· Programming using RSLogix5/RSLogix500
· Relay-Type Instructions
· Timers Instructions
· Counters Instructions
· Compare Instructions
· File Instructions
· Program Control Instructions
· Process Control Instruction
· Troubleshooting
· Omron processor families�hardware features and troubleshooting
· Hardware overview of the CQM and C-series processors of the Omron PLC family,
including an overview of digital, analogue and intelligent I/O modules.
· Introduce to the different programming packages is given, as well as how Omron PLC
programs can be structured, programmed, documented, installed and maintained with
help of SYSWIN.

2. Course Benefit:
· Understand Industrial PLC technologies in Canada
· Get the actual PLC experience through the real project